There are two wires on either side of an automatic garage door to raise and lower it with ease. Wear and strain ultimately take their toll on these cables, leading them to lose tension, fray, or break.

If you delay garage door cable repair or try a do-it-yourself fix, many things might go wrong. If your garage door cable breaks, follow these instructions to prevent additional damage or personal danger.

Recognizing the Functions of Garage Door Springs

Depending on the Kind Of Springs your garage door has, it has various cables.

  • Torsion spring garage doors often include lift cables. These springs are placed above the door, and the wires linked to the bottom corners of the door are run up to them.
  • Extension spring-operated garage doors have retaining cables. The wires are often concealed underneath the springs that go vertically along a garage door’s left and right sides. If the springs break, the holding cables keep them from soaring into the air.
Recognizing the Functions of Garage Door Springs

Recognizing the Functions of Garage Door Springs

Both are made of galvanized wire and are heavy-duty twisted cables. However, issues such as worn-out bearings in a pulley, excessive moisture towards the bottom of the garage door, or improper track alignment may increase wear, rust, and corrosion. They normally run without trouble for years. You may be able to prevent a cable from breaking if you do regular visual checks.

Why Did The Cable For Your Garage Door Break?

Every time the garage door is opened, these wires are pulled through a set of pulleys or wound around a spool or drum.

Moisture around the bottom of the door might corrode or wear down this component over time. It is possible that a worn-out bearing in a pulley may speed up the process of deterioration. The cable may be rubbing on the garage door track if the door isn’t in its proper position. When a cable is visually inspected, it is generally possible to replace it before it has a chance to fail. Corrosion, rust, fraying, and excessive wear are all red flags.

• Stop using your garage door and call for help right now.

A damaged cable causes additional pressure to be transferred to the other cable, putting a lot of stress. A crooked and imbalanced garage door might result as a result of this. A broken cable might be the cause of your garage door’s unusual squeaks and shakes. Keep the door closed until a technician can examine it.

If the wire to your Garage Door is Damaged and Jammed open, your house is left vulnerable. As a precaution, cut any unbroken cable so the door can drop and secure your property until an expert can inspect it. Your repair costs will not be increased since a garage door repair professional will Replace Both Wires as a precaution.

• Fixing a garage door cable yourself is a bad idea for many reasons.

Garage door cable repair should be done by a professional. The act of repairing a damaged garage door causes thousands of non-professionals to suffer injuries every year. Don’t risk your life by trying to fix your garage door on your own if you don’t know what you’re doing. Instead, get a professional to do the job right the first time.

The garage door’s overall functioning will be evaluated as part of the repair. Adjustments may be made to all door components if the technician identifies faults that might cause excessive cable wear and tear.

Is There a Way to Keep the Cable on Your Garage Door from Breaking?

It is possible to avoid a damaged garage door cable by doing preventative maintenance.

The best way to avoid this is to:

  • Cables should be checked for fraying or kinking and the accumulation of dirt and debris.
  • Lubricate/oil the cables and springs of your garage door regularly.
  • Getting rid of everything that might impede a cable’s ability to function.

Old garage door components may also be replaced with newer models. This reduces the stress on the wires of an automated garage door opener. This provides several long-term advantages for your garage door’s functioning, efficiency, and lifetime.

Bottom Line

The smooth, unrestricted movement of anything as hefty as a garage door requires a complex system with numerous moving components. The actual raising of the garage door is done by a set of garage door springs that are under a lot of stress.

If one of these springs were to fail, it might cause catastrophic harm or damage. The risk is minimized by a big wire running through the springs, which prevents them from recoiling. In the event, though, the cable was to fail, you’d be faced with a significant issue.

The sooner you contact Elite Garage Door & Gate Repair to diagnose and repair a frayed or broken garage door cable, the better. When anything goes wrong with your garage door, you can rely on our experts to figure out what’s wrong and fix it.